Phone:
(949) 394 6355
Physical address:
2941 S Main St. Unit A, Santa Ana, CA, 92707

Sticking, derailing, uneven doors and grinding noise can all point to a failing track. Here are the five signs and what to do about them.
Closet door tracks wear out quietly. By the time most people notice, the doors are dragging or falling off. Catching the warning signs early can mean a simple repair instead of a full replacement.
If cleaning the track and adjusting the rollers doesn’t restore a light, smooth glide, the track itself may be worn, dented or out of level. See why closet doors stick.
Repeated derailing often means bent track edges or a worn channel that no longer holds the rollers. A missing bottom guide is another common cause. Read why closet doors come off track.
Look along the track at eye level. Dents, kinks, grooves, cracks or sections lifting from the floor or header are clear signs it’s failing.
A tapered gap at the jamb or panels that no longer meet in the middle can mean the track has shifted or sagged, especially a top track pulling away from the header.
Grinding often means debris or a worn track surface. Clicking or bumping in one spot points to a dent. Metal-on-metal means something has worn through. See noisy sliding closet doors.
A new track only performs if it’s mounted level, secured into framing and paired with matched rollers that are properly adjusted. That’s how we do every repair and installation, and we back our labor with a 1-year warranty. Roller replacement typically runs $50–$75 per roller; new sliding doors run $550–$850 per panel installed.
Quality tracks can last decades with clean tracks and good rollers. Light-duty tracks under heavy doors wear much faster.
Yes, if a compatible track is available and the doors are in good condition.
Seeing these signs? Call or text (949) 394-6355 or book a visit anywhere in Orange County.